Curtain Wall Systems from Senior Architectural Systems
Elite Aluminium Systems design, fabricate and install a fantastic range of high quality curtain wall products from Senior Architectural Systems.Curtain wall is designed to resist air and water infiltration and to provide a thermal barrier between inside and out.
It also allows for the filtration of more natural light into the building and is used on numerous new-build and refurbishment developments.We offer a full range of curtain wall systems that are fully drained and have a high thermal performance to cope with the most extreme weather conditions.
We can provide an extensive range of high performance curtain walling systems from ground floor treatments to high rise multi-storey facades to roof glazing, manufactured using either capped or capless systems.
A variety of mullion and transom depths allow for the fabrication of screens with large uninterrupted glazing areas creating consistent attractive facades.
All curtain wall sections are thermally broken and there are options for single, double or triple glazing. The entire curtain wall range can be supplied in a range of polyester powder or anodised finishes.
A dual colour option is available throughout. For more information regarding our products or advice on product selection, please contact our offices.
SENIOR ARCHITECTURAL SYSTEMS
SF52
The SF52 curtain wall system has been designed to enhance thermal performance meaning the system can exceed current building regulations. It is a stick type front loaded system using spring pins and a specially designed cleat which allows square cutting throughout. The system can be either zone drained (via conventional pressure plate drainage or using a specially designed spout system) or it can be mullion drained. The zone drained system can be assembled capped, uncapped (using the SAS toggles) or combination of the two. Glazing ranges from 22mm to 50mm. Section sizes vary from 50mm to 250mm (50, 80, 100, 125, 150, 175, 200, 225, 250). Specific profiles can be incorporated offering design flexibility.
All aluminium sections are extruded using Aluminium Alloy 6060, 6063 or 6083 (for improved strength) T6 to BS EN 755 part 9 2008 or BS EN 12020-2. Thermal breaks are extruded to BS 7619. Gaskets are manufactured in accordance with BS 3734.
The SF52 curtain wall system is available typically in three finishes.
• Polyester Powder Coating to BS EN 12206-1: 2004 Part 1 – painted in house. Surface finish at 40 microns standard, or enhanced to 60 microns for marine environments, in accordance with ISO 9001, ISO 14001 and ISO 18001.
• Anodised finishes are to BS3897:1991 to a minimum of 25 microns (AA25), supplied in a limited range of colours.
• Mill finish.
SF52 curtain wall system utilises square cuts throughout and is joined using a specially designed cleat and spring pin within the zone drained system. The mullion drained system uses a “lap” joint. A proprietary sealant is used on all metal to metal joints in line with good working practice. All internal gaskets are designed to mate with injection moulded corner pieces and are sealed at joints. Shear blocks and reinforcing sleeves are available. Average U Values Due to the variety of profiles, mullion spacings, glass and panel specifications on each project; a specific U-value calculation will be require.
Fully Capped
Silicone Glazed
Vertical Capped
Horizontal Capped
Mullion Drained
We have used this product to great effect over the last few years. This variation creates a sleek and uniformed finish just like the rest of the SF52 range. Offering invisible drainage, the mullion drained system has a specially designed drainage system which only need to be used above splice joints. Enabling the system to drain through the vertical pressure plate, there is no drainage required on transoms.
Having no need for visible drainage slots alongside it’s unique slim sight lines, Seniors Mullion Drained offers great flexibility. With the ability to be faceted to 20˚ – 10˚ degrees per side without any need for additional adaptors this solution is ideally suited to a wide range of applications offering ease and speedy installation.
Constructed using step cut transoms that are sealed agains’t an end seal placed into the mullion. Fully compatible with the portfolio of Seniors window and door solutions we install the SF52 mullion drained is also capable of holding double or triple glazed units ranging from 28mm to 52mm thickness.
Sloped
SF52
SF62 Curtain Wall
The SF62 curtain walling range has been designed to enhance thermal performance meaning the system can exceed current building regulations. The wider 62mm box allows the system to be more flexible in accommodating structural movement. The system is a stick type front loaded system using spring pins or a shear block (depending on the project requirements) and a lap cut transom. The system is mullion drained and can be fully capped, fully silicone glazed (using the SAS toggles) or a combination of the two. Sections sizes vary with transom from 80mm to 250mm (80, 100, 125, 150, 175, 200, 225, 250) and mullions from 72mm to 242mm (72, 92, 117, 142, 167, 192, 217, 242). The system can be used in conjunction with other SAS systems. Specific profiles can be incorporated offering design flexibility.
All aluminium sections are extruded using Aluminium Alloy 6060, 6063 or 6083 (for improved strength) T6 to BS EN 755 part 9 2008 or BS EN12020-2. Thermal breaks are extruded to BS 7619. Gaskets are manufactured in accordance with BS 3734.
The SF62 curtain wall system is available typically in three finishes.
• Polyester Powder Coating to BS EN 12206-1: 2004 Part 1 – painted in house. Surface finish at 40 microns standard, or enhanced to 60 microns for marine environments, in accordance with ISO 9001, ISO 14001 and ISO 18001.
• Anodised finishes are to BS3897:1991 to a minimum of 25 microns (AA25), supplied in a limited range of colours.
• Mill finish.
The SF62 curtain walling range is a mullion drained system utilising a “lap” joint used in conjunction with a spring pins or shear blocks, depending on the connection type and infill weight required. All internal gaskets are designed to mate with injection moulded corner pieces which are sealed at joints. Reinforcing sleeves, steel and back boxes can be used to strengthen mullions and achieve longer spans. For specific construction details, please refer to the technical manuals.
Due to the variety of profiles, mullion spacings, glass and panel specifications on each project; a specific U-value calculation will be require. Please contact our Technical Department or Architectural Advisors.
Fully Capped
Silicone Glazed
Vertical Capped
Horizontal Capped
Mullion Drained
We have used this product to great effect over the last few years. This variation creates a sleek and uniformed finish just like the rest of the SF52 range. Offering invisible drainage, the mullion drained system has a specially designed drainage system which only need to be used above splice joints. Enabling the system to drain through the vertical pressure plate, there is no drainage required on transoms.
Having no need for visible drainage slots alongside it’s unique slim sight lines, Seniors Mullion Drained offers great flexibility. With the ability to be faceted to 20˚ – 10˚ degrees per side without any need for additional adaptors this solution is ideally suited to a wide range of applications offering ease and speedy installation.
Constructed using step cut transoms that are sealed agains’t an end seal placed into the mullion. Fully compatible with the portfolio of Seniors window and door solutions we install the SF52 mullion drained is also capable of holding double or triple glazed units ranging from 28mm to 52mm thickness.
SF62
The SCW Curtain Wall is a cost-effective semi-unitised, zone-drained and pressure equalized aluminium system. It offers a slim 50mm sightline, with a choice of 3 mullion and 4 transom depths. The system is capable of being fabricated into ladders for quick assembly on site.
With an increased rebate size it is possible to achieve additional clearance between the section and infill, this allows glass to move a between the sections where there is structural movement. Also greater edge cover for issues such as guarding.
Fully Capped
Sloped
SCW
TECHNAL
GEODE MX successfully combines the creative and visual demands of architects and the functional needs of contractors, developers, and occupiers. By simplifying the technical aspects, manufacturing, and the installation process ensuring high quality, convenience, and cost-efficiency.
Visible Grid
The MX system successfully balances the aesthetic requirements of architects with the functional needs of contractors, developers and occupiers, simplifying specification, fabrication and installation to ensure the highest quality and cost efficiency.
Sloped
Toggle
The MX Toggle is a system creating a flush-fitted all glass facade, combining the use of fixed glazing units, top hung vents and glazed spandrel panels. The appearance of structural glazing is achieved by using profiles that are only visible on the room side. From the outside, only the glazing and slender shadow joints are visible.
MX52
Spinal MY 62
Based on the 62mm module and with a patented assembly system, SPINAL MY combines pleasing aesthetics, large sizes, and interior comfort. The double skin creates a space between the façade and exterior wall enabling bioclimatic buildings to be created. This product is a true link combining technical and design expertise. All visual aspects can be created with easy integration.
Visible Grid
Based on the 62mm module and with a patented assembly system, SPINAL MY combines pleasing aesthetics, large sizes and interior comfort. The double skin creates a space between the façade and exterior wall enabling bioclimatic buildings to be created. This product is a true link combining technical and design expertise. All visual aspects can be created with easy integration.
Horizontal & Vertical Trame
Flat Capped
Sloped Glazing
MY62
Elegance 52 is a comprehensive aluminium curtain wall system that combines technology and design with the demands of contemporary building architecture and construction. By using a 52mm aluminium substructure width a slim sightline is provided alongside necessary strength and inertia requirements.
Standard (ST)
Elegance 52 ST is anything but standard, with a proven history for performance and thermal insulation. This thermally broken curtain wall system offers many design options by the use of differently designed mullions and cover caps.
The Elegance 52 ST offers you solutions for vertical, sloped and roof applications and can also provide facetted facade solutions.
Solutions range from cold single glazing to high-performance meeting the requirements of Passive House certification from iFT Rosenheim.
Horizontal (HL)
The hidden profile still allows the tight sealing of glass against the structure, and the gasket masks the opposing detail putting more emphasis on the horizontal cover cap depending on which option is chosen. The emphasised cover caps can be chosen out of a wide range of profiles to integrate into the total building design.
Vertical (VL)
The hidden profile still allows the tight sealing of glass against the structure, the gasket masks the horizontal detail putting more emphasis on the vertical cover cap. The emphasised cover caps can be chosen out of a wide range of profiles to integrate into the total building design.
E52
HEUCK
Developed for the most modern demands on energy efficiency in the building envelope
Top values in stability and thermal insulation
Simple processing and assembly thanks to the use of identical parts across all series
Filigree design thanks to slimmer face widths
Fully Capped
T40
Thermally insulated aluminium facade construction in mullion-transom construction for vertical, sloping, flat or polygonal facade walls. Identical profile geometry for mullions and transoms. Glass thicknesses from 4 mm to 58 mm. Different insert elements from the HUECK system are possible.
Fully Capped
Silicone Glazed
T50
Developed for the most modern demands on energy efficiency in the building envelope. Top values in stability and thermal insulation. Simple processing and assembly thanks to the use of identical parts across all series. Filigree design thanks to slimmer face widths.
Fully Capped
Silicone Glazed
T60
ALUPROF
MB TT50
The new, modern MB TT50 curtain wall system goes a step ahead in functionality and effectiveness compared to classic crossbar facades. Offering exceptional insulation and weather performance achieved by special 3 zone cascade drainage and ventilation of the glazing rebates, it’s innovative construction enables to reasonably reduce the time required to manufacture and construct the complete curtain wall. It is designed to serve as the base system for security anti burglary and fire rated varieties.
Features
Features and benefits:
- enhanced thermal insulation
- glazing up to 56 mm
- large selection of angle connections to enable greater design flexibility
- high capacity mullion-transom connections (2,5 KN) coupled with wide range of glazing to allow the use of large size, heavy glazing panes
- transom-transom constructions option
- 3 zone drainage and ventilation system reinforced with set of gaskets to provide protection against the most unfavorable weather conditions
- selection of windows and doors available including roof vents, concealed vents and parallel windows
- semi structural EFEKT glazing option
- compliance with CE marking requirements
Performance:
Air Permeability: Class AE 1350Pa, EN 12153:2004; EN 12152:2004
Watertightness: Class RE 1800Pa, EN 12155:2004; EN 12154:2004
Thermal insulation (Uf): from 0,5 W/m2K
Burglar resistance: WK2 and WK3
MB-TT50
MB SR50 EFEKT
The system is intended for constructing and producing the light weight curtain walls of hanging and filling types. The external appearance of the façade free form visible cover beads – similar to the structural wall – was obtained thanks to the appropriate preparation of the in-fills and application of the fastening elements acting in the interspaces between the in-fills and covered with the so-called weather silicones.
EFEKT
The proper thermal and acoustic insulation was achieved by the application of a continuous thermal break made of HPVC insulation material as well as profiled gaskets made of EPDM.
Thanks to the sandwich structure of the lintel-window sill strip, in which the non-flammable materials such as mineral wool and plaster boards are used, the fire resistance classification was obtained depending on the construction of F0.25(EI15)NRO, F0.5(EI45)NRO.
In the MB-SR50 EFEKT façade it is possible to apply opening-tilt windows, basing on the structural wall system MB-SG50.
EFEKT
For any more information please call our offices or email us a message.